Sound absorber with fabric – dampens sound to reduce room echo. The covering fabric creates a neutral exterior. With several panels, you can create a moody composition, which at the same time brings silence to the room. Good sound absorption is ensured by the 20mm thick Finnish peat mat inside the panels. The dimensions of the product and the choice of fabric can be made according to your wishes. Thanks to the inwardly sloping frame edges, the photo fabric remains airy and is not in contact with the acoustic peat mat.
Reverberation measurement results on a similar product (page 12):
Properties. The product significantly dampens the echo spreading in the room and is also visually attractive. The greater the proportion of the total area of the walls and ceilings covered by the product, the better the sound insulation in the room
Usage. The product is intended for use in rooms with a normal relative humidity level – permanently no higher than 60%. Normal room temperature is recommended for installation
Installation and fastening
⇒ The product is light, therefore it is attached to walls and ceilings in the same way as wall paintings – using hanging loops, tamil or other methods
⇒ Hangers and cords can be attached to the product with screws from the back, up to 35mm from the edge of the frame (to the wooden frame inside the frame)
⇒ Due to its size, it is recommended to attach the product from all corners in a way that withstands exposure to external influences
Sound insulation. A good result is achieved when the acoustic wall and ceiling cover at least two full areas of the room by 80%. Acoustic measurements of a 3x1m gypsum mini-room showed that the sound echo is up to 0.14 seconds, which, according to Akukon’s explanations, is less than is usually the case in bedrooms (0.5 seconds at low frequencies).
Storage. Products should be stored upright and on a smooth surface. Protect products from moisture
Transport
⇒ The product must be carried with proper support and care – high tensile pressure can damage the panel.
⇒ If there is a risk that the product will be damaged during transport, additional covers or additional fastenings must be used
⇒ It is recommended to transport long parts in pairs and with two hands
⇒ The packaging and fastening tape are removed immediately before installation
Dimensions. The dimensions of the panel in the pictures are 1 x 0.5m. The maximum width of the panels can be up to 1.2m, the length of the panel is unlimited – the properties of the covering fabric and the transportability of the panels to the installation site must be taken into account
Sound-absorbing fabric, manufacturing information
⇒ Panel size and quantity according to the external dimensions given by the customer
⇒ Covering fabric according to the customer’s instructions
⇒ OSB or plywood frame
⇒ 20mm thick dried peat moss mat produced in Finland
⇒ A plaster profile around the wooden frame keeps the photo canvas under tension and prevents it from coming into contact with the inside of the panel
⇒ Wood fiberboard or furniture cardboard covers the back of the panel
| Weight | 3 kg |
|---|---|
| Dimensions | 1000 × 500 × 30 mm |
| Plasterboard | hard plaster (11 kg/m2) |
| Finish | fabric |
| Sound | 0.3s 500Hz |
| Materials | plywood, isoplate, membrane fabric, PUR glue, turbamatt |
| Author | Kipsik |
| Manufacturer | Kipsik OÜ |
| Origin | Estonia |
