Acoustic panel with wood pattern

Acoustic panel with wooden pattern is a sound diffuser made of coniferous wood. Blocks placed at different angles reflect sound waves throughout the room. In addition to significantly reducing echo, they create a great visual atmosphere. The dimensions and design of the product can be changed according to your wishes

Features. The product dampens the echo spreading in the room and is also visually attractive. The greater the proportion of the product covering the total area of ​​​​the walls and ceilings, the better the sound spreading in the room is isolated

Usage. The product is intended for use in rooms with a normal relative humidity level – permanently no higher than 60%. Normal room temperature is recommended for installation

Installation and fastening

⇒ The product is light, therefore it is attached to walls and ceilings in the same way as wall paintings – using hanging loops, tamil or other methods

⇒ Hangers and cords can be attached to the product with screws from the back or to the edge of the frame

⇒ Due to its size, it is recommended to attach the product from all corners in a way that withstands exposure to external influences

Dimensions. The dimensions of the panel in the pictures are 1.2 x 0.8m

Sound insulation. Good results are achieved if the acoustic wall and ceiling cover at least 80% of two full areas of the room (for example, one wall surface and one ceiling surface). Sound reflecting and absorbing surfaces together create excellent acoustics in the room

Storage. Products should be stored upright and on a smooth surface. Protect products from moisture

Transport

⇒ The product must be carried with proper support and care – high tensile pressure can damage the panel.

⇒ If there is a risk that the product will be damaged during transport, additional covers or additional fastenings must be used

⇒ It is recommended to transport long parts in pairs and with two hands

⇒ The packaging and fastening tape are removed immediately before installation

Acoustic panel with a wood pattern, manufacturing information

⇒ Panel size and quantity according to the external dimensions given by the customer

⇒ OSB or plywood base

⇒ 45×45 cross-section blocks cut from softwood, the top surface of which is cut at different angles

⇒ Wooden frame, with which the panel can be attached to the wall

⇒ The blocks are either glued to the frame or attached with a nail, screw, or clamp.