Sound reflector with fabric

A sound reflector with fabric, or diffuser, disperses sound falling on the surface, reducing echoes in the room. Together with sound absorbers and a bass trap, it gives the room an excellent sound-dampening effect. With several diffusers, you can create a moody composition that at the same time brings silence to the room. Product dimensions, additional attachment points, technical specifications and fabric selection can be made according to your wishes

Features. The product reflects sound waves falling on it, reducing echoes in the room and is also visually attractive. The greater the proportion of sound-affecting products covering the total area of ​​​​the walls and ceilings, the better the sound spreading in the room is controlled

Usage. The product is intended for use in rooms with a normal relative humidity level – permanently no higher than 60%. Normal room temperature is recommended for installation

Installation and fastening

⇒ The product is light, therefore it is attached to walls and ceilings in the same way as wall paintings – using hanging loops, tamil or other methods

⇒ Due to its size, it is recommended to attach the product from all corners in a way that withstands exposure to external influences

Dimensions. The dimensions of the product in the pictures are 1 x 0.4m. The maximum length of the diffuser can be up to 3.0m – take into account transportability to the installation site. The installation can consist of one or more sound reflectors.

Sound insulation. A good result is achieved when the acoustic wall and ceiling cover at least two full areas of the room by 80%. Acoustic measurements of a 3x1m gypsum mini-room showed that the sound echo is up to 0.14 seconds, which, according to Akukon’s explanations, is less than is usually the case in bedrooms (0.5 seconds at low frequencies).

Storage. Products should be stored upright and on a smooth surface. Protect products from moisture

Transport

⇒ The product must be carried correctly supported and carefully – high tensile pressure can damage the product.

⇒ If there is a risk that the product will be damaged during transport, additional covers or additional fastenings must be used

⇒ It is recommended to transport long parts in pairs and with two hands

⇒ The packaging and fastening tape are removed immediately before installation

Sound reflector with fabric, manufacturing information

⇒ Diffuser size and attachment points locations according to customer information

⇒ Cover fabric according to the customer’s request

⇒ Membrane fabric under the cover fabric if desired – to add sound-absorbing properties

⇒ CNC-cut components and auxiliary parts to obtain the desired shape during gluing

⇒ PUR glue D4, 1-component, adheres well to the cut plaster edge

⇒ Contact adhesive for gluing fabric to lower surfaces