Rehab repair plasterboard, 2.6m 60pcs/pallet

Gypsum board with a paint edge, thickness 6.5mm. for indoor use. Repair plaster is ideal for use as an alternative to dry plaster. The radius of curvature must be at least 1000 mm, bend dry

Usage. The longer edge of the plasterboard intended for renovation and repair work is covered with cardboard and thinned, the shorter edge is cut straight. The plaster core of the board is reinforced with fiberglass. Use the plasterboards according to the NORGIPS system NORGIPS instructions

Installation

⇒ The corresponding technical solutions have been provided by the construction project developer for installation on construction sites

⇒ It is recommended to install gypsum board on a stone, frame, wood or gypsum surface using a wooden or metal frame. If the shape of the product and the profile of the nearby surface allow it, the product can be properly attached to it

⇒ It is recommended to use either a wooden material or a metal frame to connect the plasterboards together, with which both halves of the product are connected to each other in such a way that cracks do not form over the joints after finishing

Fixing. The plasterboard is attached either with screws, adhesive foam or adhesive sealant. The requirements for screwing the product are described in the plasterboard installation instructions

Cutting. It is easy to cut plasterboard to size

⇒ Cut the paper surface in a straight line on one side with a construction knife

⇒ Break the plasterboard along the long cutting line

⇒ Cut the paper surface on the other side

Finishing. According to the plasterboard finishing instructions

Edge. The longer edge of the plasterboard is thinned and covered with cardboard, and the shorter edge is cut straight

Filling the joints. The edges of the plasterboard are thinner, the joint between the boards is covered with joint tape and then puttyed. In the joints of plasterboards with a cut edge, chamfers can be cut to accommodate a sufficient amount of sealant or joint filler

Color. Ivory cardboard with blue printing

Storage. The boards should be stored on a smooth surface, preferably on a pallet. Protect the boards from moisture

Transport on the construction site.

⇒ The plasterboards should be carried carefully so that the cut edge is vertical

⇒ A suitable transport trolley is used to transport the plasterboards on the construction site

⇒ If there is a risk that the product will be damaged during transport, additional covers or additional fastenings must be used

⇒ Soovitataa⇒ It is recommended to transport long or heavy boards with two people and with two hands supporting themv on transportida pikki või raskeid plaate kahekesi ja kahe käega toetades

Plasterboard dimensions. Width 1200mm, length 2600mm. Thickness 6.5mm

Quantity on pallet: 60 plasterboards, total area 187.2 m², total weight of the pallet 1048 kg

Norigips Rehab 6.5mm repair plasterboard, data:

⇒ Specific gravity 5.6 kg/m²

⇒ Area 1.2 x 2.6m =3.12 m²

⇒ Weight approx. 17.5kg