Workroom 3×2, 6 m²

Workroom 3×2, 6 m² – a simple workshop, suitable for use by 2 people, for example commentators. Assembled from 26 wall modules and 16 ceiling modules. The ceiling modules have a sound-diffusing surface. The workshop has LED lighting and ventilation holes. The walls and ceilings are painted. The smooth door is acoustically sealed with a door leaf. The ceiling modules and lighting rest on a 145x45mm wooden ceiling beam running in the middle of the room. The ventilation is controlled by a motor on the ceiling, which is connected between noise-dampening pipes. The product is used for quick dust- and noise-free construction of smaller rooms. The modules are easy to assemble and dismantle. Inside the modules is a plywood frame, 50mm glass wool and wooden ribs. Wood screws are used for fastening. The volume and area of ​​the room can be increased unlimitedly. An additional load-bearing post or wall module resting on the floor must be designed up to 3m from the wall. Product dimensions and selection of materials according to the customer’s wishes

Product components

⇒ 16x ceiling module 0.1m x 0.4m, weight >10 kg, made of standard plaster

⇒ 4x corner module in all corners, weight >11 kg, made of standard plaster, with L-edge

⇒ 17x full wall, weight > 27 kg, with reinforced frame, with L-edge

⇒ 2x end wall on both sides of the doorway, weight >13 kg, with reinforced frame, L-edge on 1 side

⇒ 3x short full wall above the doorway, weight >6 kg, with reinforced frame, with L-edge

⇒ door panel with 68mm frame, 9×21

Properties. The product insulates sound and heat, properties corresponding to plasterboard

Use. The product is intended for use in rooms with a relative humidity of no more than 70%. The maximum installation temperature is 50°C

Color. According to the customer’s request, fabric, felt or a covering film can be used instead of a paint coating.

Installation and fastening

⇒ The product retains its shape thanks to the way the drywall is treated and the adhesive used in the product

⇒ The contour of the workspace is formed from the lower aluminum profile, the corners are cut diagonally

⇒ The farthest wall corner (one corner module and two wall modules) is installed first, which will later be difficult to access from the outside.

⇒ The modules are connected to each other using an L-profile mortise joint, a gasket up to 12mm wide and 2mm thick can be installed on the L edge

⇒ The modules are attached only from above through the upper aluminum profile, using screws

⇒ The upper aluminum profile is fixed with wood screws 30mm from the outer edge, preferably from the middle of the module

Cutting. The product is not cut or processed, as this may damage the internal structure and fastening elements

Storage. The products should be stored upright or supported on the side edge and on a smooth surface. Protect the products from moisture

Transport

⇒ It is recommended to use auxiliary equipment (trolley, etc.) to transport the modules

⇒ The modules should be carried correctly supported and carefully – excessive pressure may damage the panel

⇒ Modules with glass surfaces must be transported very carefully and on supports

⇒ If there is a risk that the product will be damaged during transport, additional covers or additional fastenings must be used

⇒ The packaging and fastening tape are removed immediately before installation

Dimensions. The dimensions of the product in the pictures are 3.0m x 2.0m, height 2.4m. The product size can be changed

Workroom (3×2, 6 m²), manufacturing information

⇒ The size and choice of materials of the standard gypsum product according to the external dimensions given by the customer, gypsum board made of a different material can also be used

⇒ The choice of the color or material of the surface coating, as well as the choice of the material for the floor coating according to the customer’s wishes

⇒ The thermal insulation and sound insulation inside the wall is increased by 50mm glass wool

⇒ The modules are connected to each other using an L-profile, between which there is a 2x12mm gasket

⇒ The modules are fixed to the upper aluminum profile with screws: 2 attachment points for each module

⇒ Inside the module there is a plywood frame, wooden board (plywood, OSB) ribs to support the structure, wooden boards can be added inside the product to attach lighter objects

⇒ PUR glue D4, 1-component, adheres well to the cut plaster edge, the customer can opt out of gluing

⇒ Tape to fix the shape of the product during gluing and transportation (if necessary)