Gallery 2x2m², open area

Gallery 2x2m², open area – consists of 8 modules and 4 edge covers. This is a freestanding open-sided booth with two open sides. The open booth includes 220V electrical outlets and LED lighting. Walls and ceiling are coated with paint (can also be chalkboard paint, for example), and the floor is covered with 6.5mm LVT vinyl parquet. If the open area is to be enclosed, optional black-and-white gypsum hollow panels can be added (not included). A circular LED light fixture can be installed in the ceiling (not included). The floor module rests on adjustable legs, allowing for up to 20mm floor level difference. The robust construction is ensured by the use of hard gypsum board and a unique tongue-and-groove system with double sealing. Modules without openings include U-profiles for internal cable and pipe installation. Designed for fast, dust-free and noise-free construction of smaller rooms. Inside the modules: plywood frame, 50mm mineral wool, and wooden slats. Assembled using furniture bolts. The floor module rests on lockable wheels. Modules are easy to assemble and dismantle. Room area and volume can be expanded by adding 2x1m sections. Product height and material choices are customizable upon request

Product components

⇒ 2x Floor module 2.0m x 1.0m, weight >73 kg, with reinforced wooden boards and frame

⇒ 2x Ceiling module 2.0m x 1.0m, weight >56 kg, made of regular plaster, with reinforced frame

⇒ 4x full wall on the sides, weight >78 kg, with reinforced frame, special edge on the sides

Features. Product parts insulate sound and heat, similar properties to plaster walls

Use. The product is intended for use in rooms with a relative humidity of no more than 70%. The maximum installation temperature is 50°C

Color. According to the customer’s request, fabric, felt or a covering film can be used instead of a paint coating.

Installation and fastening

⇒ The product retains its shape thanks to the way the drywall is treated and the adhesive used in the product

⇒ The floor module is installed first, the legs of which are adjusted so that the module rests on the ground at every point. The leg fasteners must be located below the groove plane

⇒ The modules are connected to each other using two different tenon grooves, the modules are fastened with furniture bolts

⇒ The upper aluminum profile is fastened with the upper wood screws 30mm from the outer edge

⇒ The lower aluminum profile is fastened with wood screws from below 30mm from the outer edge, or glued with double-sided tape

Cutting. The product is not cut or processed, as this may damage the internal structure and fastening elements

Storage. The products should be stored upright or supported on the side edge and on a smooth surface. Protect the products from moisture

Transport

⇒ It is recommended to use auxiliary equipment (trolley, etc.) to transport the modules

⇒ The modules should be carried correctly supported and carefully – excessive pressure may damage the panel

⇒ If there is a risk that the product will be damaged during transport, additional covers or additional fastenings must be used

⇒ The packaging and fastening tape are removed immediately before installation

Dimensions. The dimensions of the product in the pictures are 2.0m x 2.0m, height 2.4m

Gallery 2x2m² (open area), manufacturing information

⇒ The size of the hard plaster product and the choice of materials according to the external dimensions given by the customer, plasterboard made of a different material can also be used

⇒ The choice of the color or material of the surface coating, as well as the choice of the material for the floor coating according to the customer’s wishes

⇒ The thermal insulation and sound insulation inside the wall is increased by 50mm glass wool

⇒ A dowel system is used to connect the modules together

⇒ There are 2 parallel 3x30mm PE sealing tapes at the joints between the modules

⇒ The modules are fastened together with furniture bolts: 4 bolts vertically in each connection and 1-2 fastening points horizontally.

⇒ Inside the module there is a plywood frame, wooden board (plywood, OSB) spacers to support the structure, wooden boards can be added inside the product to fasten lighter objects

⇒ PUR glue D4, 1-component, adheres well to the cut plaster edge, the customer can opt out of gluing

⇒ Tape to fix the shape of the product during gluing and transportation (if necessary)