Cabin 1x1m², 34 dB

The cabin 1x1m², 34 dB in top view is designed as an acoustic with a heating solution. The cabin consists of 6 modules and a heating panel and is easily movable thanks to its wheels. The cabin has heating, electricity, LED lighting and ventilation. The walls are covered with paint and felt and the floor is vinyl parquet. The ceiling has a sound-absorbing peat mat. The glass door is acoustically sealed and lockable. The use of hard plaster and a unique dowel system with double sealing ensure a strong structure and good sound insulation. Inside the modules, without openings, there is a U-profile for installing cables and pipes inside the wall. The product is used for quick, dust-free and noise-free construction of smaller rooms. Inside the modules there is a plywood frame, 50mm glass wool and wooden ribs. Furniture bolts are used for fastening. The floor module rests on lockable wheels. The modules are easy to assemble and dismantle. Product height and choice of materials according to the customer’s wishes

Product components

⇒ Floor module 1.0m x 1.0m, weight > 37 kg, reinforced with wooden boards and frame

⇒ Ceiling module 1.0m x 1.0m, weight > 28 kg, made of regular gypsum, with reinforced frame

⇒ 2x end wall on three sides, weight > 70 kg, reinforced frame, special edge on 1 side

⇒ Module with wall niche, in which the heating panel is located, weight >77 kg, with reinforced frame, special edge on 1 side

⇒ end module with door opening, weight >43 kg (without door), with reinforced frame, special edge on 1 side

Properties. The product insulates sound and heat, properties corresponding to plasterboard

Use. The product is intended for use in rooms with a relative humidity of no more than 70%. The maximum installation temperature is 50°C

Color. According to the customer’s request, fabric, felt or a covering film can be used instead of a paint coating.

Installation and fastening

⇒ The product retains its shape thanks to the way the drywall is treated and the adhesive used in the product

⇒ The products are connected to each other using a top strip or metal profile. There is a wooden board on the edge of the product for screwing from the top

⇒ To align products in one row, it is recommended to use an upper and lower aluminum U-profile, the inner dimension of which corresponds to the width of the product

⇒ When the wall intersects with a nearby wall or ceiling, it is recommended to use a self-expanding sealant to seal the joints

Cutting. The product is not cut or processed, as this may damage the internal structure and fastening elements

Storage. The products should be stored upright or supported on the side edge and on a smooth surface. Protect the products from moisture

Transport

⇒ The weight of the modules is 70kg to 110kg (floor module), it is recommended to use auxiliary equipment to transport the modules

⇒ The modules should be carried correctly supported and carefully – excessive pressure may damage the panel

⇒ Modules with glass doors should be transported very carefully and on edge

⇒ If there is a risk that the product will be damaged during transport, additional covers or additional fastenings must be used

⇒ The packaging and fastening tape are removed immediately before installation

Dimensions. The dimensions of the product in the pictures are 1.0m x 1.0m, height 2.4m

Cabin (1×1 m², 34dB), manufacturing information

⇒ The size of the hard plaster product and the choice of materials according to the external dimensions given by the customer, plasterboard made of a different material can also be used

⇒ The choice of the color or material of the surface coating, as well as the choice of the material for the floor coating according to the customer’s wishes

⇒ The thermal insulation and sound insulation inside the wall is increased by 50mm glass wool

⇒ A dowel system is used to connect the modules together

⇒ The sound insulation of the joints between the modules is improved by an acoustic seal in the dowels, there are 2 parallel 3x30mm PE sealing tapes at each joint between the modules

⇒ The modules are fastened together with furniture bolts: 4 bolts vertically in each connection and 1-2 fastening points horizontally.

⇒ Inside the module there is a plywood frame, wooden board (plywood, OSB) spacers to support the structure, wooden boards can be added inside the product to fasten lighter objects

⇒ PUR glue D4, 1-component, adheres well to the cut plaster edge, the customer can opt out of gluing

⇒ Tape to fix the shape of the product during gluing and transportation (if necessary)